LKR-100 Uhie na-acha anụnụ anụnụ na-enwu ọkụ Onye na-anwale mmanya mmanya (Ndị na-anwale mmanya na-egbu egbu) maka ndị mmanye iwu.

LKR-100 na- Ihe nlere mmanya na-acha anụnụ anụnụ na-acha anụnụ anụnụ

Fuel cell-type exhaled gas Alcohol Tester Fuel Cell Type Breath Alcohol Analyzer

Inhalation akpaaka: ikuku na-efe efe site na ikuku, nsonaazụ ya dị ngwa, dị ọcha na ịdị ọcha.

Otutu mkpu: ụda mkpu ọkụ na ịma jijiji ozugbo

Ọkụ siri ike: ìhè ọcha dị anya na-egosipụta ọkụ na ọkụ stroboscopic

Otu mkpu dị elu: otu ọpịpị iji malite mkpu eletrọnịkị

Uhie na-acha anụnụ anụnụ na-egbu maramara: ịdọ aka ná ntị ọkụ na-acha uhie uhie na anụnụ anụnụ

Mpempe windo ihe mberede: igwe nchara tungsten, nchekwa na ngwa ngwa

Mma ndọta siri ike: adaba na nke edobere n'ime ahụ ụgbọ ala. ihe mkpuchi. Ihe ịrịba ama ịdọ aka ná ntị

Batrị ike dị elu: 3000mAh ikike dị elu. Nnwale mmanya na-aga n'ihu karịa oge 500

Before use, please check whether the battery is installed, unscrew the battery cover with the counter- clockwise rotation, load the battery into the battery form at the positive and negative electrode, and rotate the battery cover clockwise.

I. Alcohol concentration detection
Long press the “alcohol exhaust test button” for 2 seconds to open the machine, and the screen shows the boot screen (Figure 1). Press again, voice prompt “blow please”, blow for 2-4 seconds:

A. When the subject does not sample the alcohol gas, the voice prompts “Thank you for your cooperation”, and the screen shows “No alcohol” (Figure 2);

B. When the subject samples the alcohol gas, the baton will appear in a red and blue flash, and the voice prompt is “Sorry, you have drunk”, showing

the screen The screen shows “consumed alcohol + alcohol concentration (00 mg / 100mL)” (Figure 3). After turning on, press “alcohol test key” for 3 seconds to turn down long, and the screen shows the shutdown screen (Figure4).

2、the baton operation Press the “light button” short, turn on the light often on, press the light again, press to turn off the light again Short press on the “warning light button”, open the baton is often bright state, and then short click on the cycle to choose: often bright, strobe, interactive flash, turn off.

3、Flashlight operation .
Press the “light button” short, turn on the light often on, press the light again, press to turn off the lig

4、Sentinel operation You can set up or view the eight menus of “machine calibration, clock setting, record query, system setting, voice When starting on, press “Lighting button” and “Warning light button” to enter the menu setting interface.Press “light button / warning light button” to choose up and down, press “alcohol row test button” to confirm, and press “light button” and “warning light button” to return to the previous level Short press “electronic whistle button”, machine “tick”; long press “electronic whistle button”, machine “tick. …”.