LKR-100 Red blue Flashing Lights Alcohol tester ( Breath Alcohol Testers ) for law enforcement

LKR-100 Red blue Flashing Lights Alcohol tester

Fuel cell-type exhaled gas Alcohol Tester Fuel Cell Type Breath Alcohol Analyzer

Automatic inhalation: air blowing through the air, the results are quick, clean and hygienic.

Multiple alarms: sound light alarm and vibration prompt

Strong lighting: long distance white light highlight lighting and stroboscopic lighting

High single alarm: one click to start electronic alarm

Red and blue flashing: red and blue light warning and alert

Emergency window breaker: tungsten steel window breaker, safe and fast

Strong magnetic attraction: convenient and fixed in car body. enclosure. Warning signs

High energy battery: 3000mAh high capacity. Continuous wine testing for more than 500 times

Before use, please check whether the battery is installed, unscrew the battery cover with the counter- clockwise rotation, load the battery into the battery form at the positive and negative electrode, and rotate the battery cover clockwise.

I. Alcohol concentration detection
Long press the “alcohol exhaust test button” for 2 seconds to open the machine, and the screen shows the boot screen (Figure 1). Press again, voice prompt “blow please”, blow for 2-4 seconds:

A. When the subject does not sample the alcohol gas, the voice prompts “Thank you for your cooperation”, and the screen shows “No alcohol” (Figure 2);

B. When the subject samples the alcohol gas, the baton will appear in a red and blue flash, and the voice prompt is “Sorry, you have drunk”, showing

the screen The screen shows “consumed alcohol + alcohol concentration (00 mg / 100mL)” (Figure 3). After turning on, press “alcohol test key” for 3 seconds to turn down long, and the screen shows the shutdown screen (Figure4).

2、the baton operation Press the “light button” short, turn on the light often on, press the light again, press to turn off the light again Short press on the “warning light button”, open the baton is often bright state, and then short click on the cycle to choose: often bright, strobe, interactive flash, turn off.

3、Flashlight operation .
Press the “light button” short, turn on the light often on, press the light again, press to turn off the lig

4、Sentinel operation You can set up or view the eight menus of “machine calibration, clock setting, record query, system setting, voice When starting on, press “Lighting button” and “Warning light button” to enter the menu setting interface.Press “light button / warning light button” to choose up and down, press “alcohol row test button” to confirm, and press “light button” and “warning light button” to return to the previous level Short press “electronic whistle button”, machine “tick”; long press “electronic whistle button”, machine “tick. …”.